OpenLogger - Firmware Update

Required Update - First-Time Connection

Upon establishing a connection to the OpenLogger for the first time, WaveForms Live will check the device's firmware to see if needs to be updated. The firmware must be updated from the factory default before the OpenLogger can be used.

Note:After the first required update, described in this guide, an OpenLogger's firmware can be checked and updated through its Configuration Menu, found through the Device Manager in WaveForms Live.

1.

ClickUpdate Firmwareand follow the instructions to update the firmware on the OpenLogger.

2.

Review theCurrent Firmware Versionon the device and theLatest Firmware Versionavailable.

3.

Select the latestAvailable Firmware Version.

4.

At the bottom right corner of the screen, clickUpdateto load the new firmware onto the device. The firmware update will take about 10 seconds to complete.

5.

与update complete, clickDone.

More Information

查看openlog的Resource Centerfor more guides, tutorials, and projects.