Eclypse Z7: Zynq-7000 SoC Development Board with SYZYGY-compatible Expansion

$ 499.00

(1 review) Write a Review

Sku：

410-393

Description
1评论

概述

这Eclypse Z7 is specifically designed to enable the rapid prototyping and development of embedded measurement systems. Featuring high-speed Zmod ports for modular expansion and a Xilinx Zynq®-7020 SoC, the Eclypse Z7 is fast and flexible, reducing the time it takes for engineers and researchers to develop innovative and powerful new high-speed instrumentation, control, and measurement systems for edge-computing, medical, and communications applications.

ZMOD扩展

Zmod is Digilent’s expansion solution using the open-source SYZYGY standard from Opal Kelly. Faster than the Pmod Standard and more compact and cost-effective than FMC, Zmods improve the customizability options for high-speed I/O. Plug in your application specific Zmods and get up and running in hours or days, instead of weeks or months. Take a look at the特征选项卡以获取兼容ZMOD的列表。

特征
Zynq-7000 APSOC	Chip number: XC7Z020-1CLG484C 667 MHz dual-core Cortex-A9 processor DDR3L内存控制器，具有8个DMA通道和4个高性能AXI3从属端口 High-bandwidth peripheral controllers: 1G Ethernet, USB 2.0, SDIO Low-bandwidth peripheral controllers: SPI, UART, CAN, I2C 可从JTAG，QUAD-SPI Flash和MicroSD卡编程可编程逻辑等效于Artix-7 FPGA
记忆	1 GIB DDR3L，带32位总线 @ 1066 MT/S 16 MB Quad-SPI Flash with a factory-programmed 48-bit globally unique EUI-48/64™ compatible identifier microSD card slot
力量	力量ed from external 12V 5A supply Platform MCU for configuration of adjustable power supplies and temperature management
USB and Ethernet	Gigabit Ethernet PHY USB-JTAG编程电路 USB-UART桥微AB USB端口和USB 2.0 PHY主机/德维克e/OTG capabilities
ZMOD端口	遵循2个端口SYZYGY Standard接口规范与各种Syzygy Pod兼容，允许多种应用用于输入和输出的专用差分钟 8 differential I/Os per port 16 single-ended I/Os per port 连接到平台MCU的DNA接口允许进行各种自动协商电源配置支持Digilent Zmod AWG 1411，范围1410，范围1210和范围1010
PMOD端口	2个十二针端口，共有16个FPGA连接的I/OS High speed voltage translation and protection circuitry
用户GPIO	2push-buttons 2个RGB LED

Eclypse Z7开发委员会
FPGA粉丝
USB A to Micro B programming cable
USB A to Micro A cable
12V 5A电源
数字自定义包装
Eight 5 mm standoffs
其他内容取决于选项选择：

添加一个ZMOD范围1410-105一个ZMOD AWG 1411
添加两个ZMOD示波器（ZMOD范围1410-105）
添加两个Zmod AWG（Zmod AWG 1411）

Development Environments

为了为您的Eclypse Z7创建和修改设计，您可以使用Xilinx的Vivado Design Suite。Vivado是为HDL设计的合成，实现和分析而设计的软件。Eclypse Z7由免费的WebPack版本支持。

您可以使用Xilinx的Petalinux工具在Zynq-7000上自定义，构建和部署嵌入式Linux解决方案。

Xilinx SDK可以开发针对Xilinx Soc设备的嵌入式软件应用程序，例如Zynq-7000。

Example Designs

对于那些想在没有FPGA体验的情况下开始的人，Digilent与c/c ++的eClypse一起提供了几种示例设计，包括Baremetal和Linux软件应用程序，包括ZMOD范围1410-105和ZMOD AWG的组合。

A hardware-only digital filter example targeting all available Zmods that loops signals through digital signal processing logic in the Zynq PL are also offered.

其他信息可以在Digilent参考中找到，可以通过支持材料tab.

快速找到您需要开始的东西，并减少眨眼的平均时间。

这资源中心for the Eclypse Z7 is the central hub of technical content for the board and contains everything to get started and reduce mean time to blink. This includes the reference manual and schematics plus tutorials, example designs, community projects, and a link to our technical support forum.

资源中心

快速链接

Reference Manual
原理图