![Size comparison product image of the Pmod CON1: Wire Terminal Connectors and a US quarter (diameter of quarter: 0.955 inches [24.26 mm]; width: 0.069 inches [1.75 mm]).](https://cdn11.bigcommerce.com/s-7gavg/images/stencil/1280x1280/products/173/3309/Pmod_CON1_use_600__86827.1533765647.png?c=2 "Size comparison product image of the Pmod CON1: Wire Terminal Connectors and a US quarter (diameter of quarter: 0.955 inches [24.26 mm]; width: 0.069 inches [1.75 mm]).")
The Pmod CON1 is a small module with six screw terminals to interface with external wires that are not compatible with the DIP standard. Two of the terminals can be used to provide power from an outside source and the other four can be used for data signals.
- Six screw terminals
- Four screw terminals for data signals
- Two screw terminals for external power
- Small PCB size for flexible designs 1.1“ × 0.8” (2.8 cm × 2.0 cm)
- 6-pin Pmod connector with GPIO interface
- Follows Digilent Pmod Interface Specification Type 1
- Pmod CON1
- Custom antistatic Pmod packaging
Quickly find what you need to get started and reduce mean time to blink.
All product support including documentation, projects, and the Digilent Forum can be accessed through the product resource center.
Resource Center
