![Size comparison product image of the Pmod USBUART: USB to UART Interface and a US quarter (diameter of quarter: 0.955 inches [24.26 mm]; width: 0.069 inches [1.75 mm]).](https://cdn11.bigcommerce.com/s-7gavg/images/stencil/1280x1280/products/218/3128/Pmod_USBUART_use_600__67732.1533762108.png?c=2 "Size comparison product image of the Pmod USBUART: USB to UART Interface and a US quarter (diameter of quarter: 0.955 inches [24.26 mm]; width: 0.069 inches [1.75 mm]).")
The Pmod USBUART provides a USB to UART cross-conversion through the FTDI FT232R. Users may send data in either direction on the Pmod and receive the converted data in the appropriate format.
Note:There are two UART signal pin assignment conventions in use on Digilent products. This product uses the new signal assignment convention. Connecting a product using the new convention with one using the old convention requires the use of aUART Crossover Cable(not included).Click herefor a more detailed explanation.
- USB to serial UART interface
- Micro USB connector
- Option to power the system board through the FTDI chip
- Small PCB size for flexible designs 1.0“ × 0.8” (2.5 cm × 2.0 cm)
- 6-pin Pmod connector with UART interface
- Follows the Digilent Pmod Interface Specification Type 4
- Pmod USBUART
- Custom antistatic Pmod packaging
Quickly find what you need to get started and reduce mean time to blink.
所有产品支持包括文档,按工程cts, and the Digilent Forum can be accessed through the product resource center.
Resource Center
