PMOD MTD: Multi-Touch Display System

The Pmod MTDS is no longer in production. Once the current stock is depleted, it will be discontinued.

The Digilent Pmod MTDS is a gorgeous 2.8" touchscreen display with a powerful on-board microcontroller that performs graphics processing tasks. The display is a capacitive touchscreen with QVGA resolution (320×240) and 2 finger multi-touch support.

The most compelling aspect of the Pmod MTDS is the programming experience provided by its多点触摸显示系统（MTD）固件and the associated libraries. These allow you to design sleek, stylish user interfaces very quickly and with very little code. The timing dependent tasks are handled by the firmware, so integrating the display into existing projects is also a snap. Some of the key functionality provided by the libraries include the ability to draw basic shapes and text, draw images stored on microSD with binary transparency, draw buttons and easily check if they have been pressed, and check the status and location of the user's two fingers. The libraries are supported in Arduino IDE and Xilinx SDK, and have been tested with AVR based Ardiuno, chipKIT, and Arty host boards.

• 2.8“ Display with QVGA resolution (320×240)
• 2指导电容触摸面板
• Powerful PIC32MZ Microcontroller
• 多点触摸显示系统（MTD）固件
• Design a beautiful UI with only a few lines of code using libraries for Arduino IDE and Xilinx SDK
• 轻松地从MicroSD上存储的文件中绘制具有二进制透明度的图像
• 删除时尚按钮，并使用直觉功能调用随意检查其状态
• 与Arduino，Chipkit和Arty平台一起使用
• 12-pin Pmod port with SPI interface
• 关注Digilent PMOD接口规范类型2A

• PMOD MTD
• Digilent cardboard packaging with protective foam

Quick Links

参考手册
多点触摸显示系统（MTD）固件
原理图