VmodBB: VHDC Breadboard product image.
  • VmodBB: VHDC Breadboard product image.
  • Top view product image of the VmodBB: VHDC Breadboard.
  • Bottom view product image of the VmodBB: VHDC Breadboard.
  • Product image of the VmodBB: VHDC Breadboard in use and plugged into an Atlys FPGA. Atlys board is not included.

VmodBB: VHDC Breadboard

MSRP:$49.99
Was:$49.99
Now: $33.33
(You save $16.66 )
(1 review) Write a Review
SKU:
210-184-1

The VmodBB is no longer in production. Once the current stock is depleted, it will be discontinued.

The Digilent Vmod Breadboard (VmodBB) offers a ready-made solution for prototyping breadboarded circuits as accessories to Digilent system boards. The VmodBB provides connectors suitable for direct connection with various Digilent system boards.

  • VHDCI connector for connection to Digilent System boards
  • Two power and one ground bus around
  • Prototype connections on every signal
  • VmodBB
  • Two 300-tie point breadboards separated by a 100-tie point bus strip with adhesive backings
  • 两个32-pin案板16针,康涅狄格州ected directly to signals from the system board

Quickly find what you need to get started and reduce mean time to blink.

All product support including documentation, projects, and the Digilent Forum can be accessed through the product resource center.

Resource Center

Quick Links

Schematic

1 ReviewHide ReviewsShow Reviews

  • 5
    a prototype/test godsend

    Posted by Robert Shuler on 16th May 2017

    Of course, it is only useful if you have DIPs or have an adaptor to convert your IC to DIP/DIL footprint, but I have operated two of this on a GENESYS FPGA in a cyclotron facility all day for testing at typically 200 MHz. Bet you wouldn't have thought a protoboard would do that. Be careful with your routing, use isolation caps, and this one will.

Baidu