Pmod BTN: 4 User Pushbuttons product image.
  • Pmod BTN: 4 User Pushbuttons product image.
  • Top view product image of the Pmod BTN: 4 User Pushbuttons.
  • Bottom view product image of the Pmod BTN: 4 User Pushbuttons.
  • Size comparison product image of the Pmod BTN: 4 User Pushbuttons and a US quarter (diameter of quarter: 0.955 inches [24.26 mm]; width: 0.069 inches [1.75 mm]).
  • 3D CAD model of the Pmod BTN: 4 User Pushbuttons.

Pmod BTN: 4 User Pushbuttons

$7.99
(1 review) Write a Review
SKU:
410-077

The Pmod BTN gives users four momentary pushbuttons for easy user inputs to a system board.

  • Four momentary pushbuttons
  • Debouncing filters
  • Inverting Schmitt Triggers
  • Small PCB size for flexible designs 1.2“ × 0.8” (3.0 cm × 2.0 cm)
  • 6-pin Pmod connector with GPIO interface
  • Follows Digilent Pmod Interface Specification Type 1
  • Pmod BTN
  • Custom antistatic Pmod packaging

Quickly find what you need to get started and reduce mean time to blink.

All product support including documentation, projects, and the Digilent Forum can be accessed through the product resource center.

Resource Center

Quick Links

Reference Manual
Schematic

1 ReviewHide ReviewsShow Reviews

  • 4
    Using 2 PMOD BTN boards as controllers for Pong

    Posted by Ralph Irons on 3rd Jan 2022

    Learning about FPGA using the NandLand Go Board with one 12- pin PMOD socket (6 over 6 pins). Moved paddle control from the on-board 4 pushbuttons to two of the Digilent PMOD BTN boards, with the 18” PMOD cables. Could use longer cables…and the electronic debouncing is not flawless… but it is a big improvement! Much fun!

Baidu