Wifi Setup

波形生活provides a graphical user interface for configuring network adapters on WaveForms Live compatible devices. When configuring network adapter settings it is recommended to connect to the device using the Digilent Agent, however some, but not all, network settings can be changed while connected via Wifi or ethernet.

To setup Wifi on a WaveForms Live device:

  1. Launch波形生活.
  2. Add the deviceto WaveForms Live.
  3. Click theMorebutton on the device card and selectConfigure.




  4. Under theWifi Settings部分点击设置无线网络.



  5. UnderAvailable Networksclick theRefreshbutton to scan for available networks.



  6. After a few seconds a list of available networks is presented.



  7. Click the network to connect to.
  8. The network information is presented. Enter the network password or keys and clickOKto continue.



  9. The device will connect to the specified network and the network will be displayed inSaved Networkssection.

    Saved networks are set toauto-connectby default and the device will attempt to connect to the network next time it boots.

  10. ClickCloseto close the network设置无线网络wizard.



  11. ClickConnectto refresh the device information. The newDevice IP Addressis displayed in theWifi Settingssection.



The device is now connected to the Wifi network and can beadded to WaveForms Liveas a network device or using the Digilent Agent.

,,,,,,