Digilent Pro MX7

Reference Manual Technical Support

Digilent Pro MX7

Advanced Peripherals Embedded Systems Trainer Board

Features

52 available I/O pins

10 analog inputs

Two analog comparators

Five timer capture inputs with assigned PWM

Programming/debugging circuit

Five 16-bit timer/counters

2 CAN network controllers, five compare/PWM outputs

6 UART serial interfaces

4 SPI serial interfaces

5 I2C serial interfaces

Key Specifications

CPU Clock

80MHz

RAM

128KB

Flash

512KB

Connectivity and On-board I/O

Pmod Ports

6 12-pin Pmod ports

Ethernet

10/100

USB

2 USB connectors

USB 2.0 OTG

A | Micro A/B

Push-buttons

3

LEDs

4

Electrical

功率(USB)

USB小o-B

Power (Coaxial)

3.6-12V (2.5mm)

Logic Level

3.3V

Design Resources

Eagle Project

Bootloader

Documentation

Primary IC

PIC32MX795F512L

Schematic

Network Shield

Microchip Agreement

Programmer's Reference Manual

The Digilent Pro MX7 has been retired and is no longer for sale in our store.

Digilent Pro MX7 is the new name for chipKIT Pro MX7 and Cerebot MX7. This board retains all functionality of the chipKIT Pro MX7 and Cerebot MX7.

The Pro MX7 is a microcontroller development board based on the Microchip® PIC32MX795F512L, a member of the 32-bit PIC32 microcontroller family. It is compatible with Digilent's line of peripheral modules, Pmods, and is suitable for use with the Microchip MPLAB® IDE tools. The Pro MX7 is also compatible for use with the MPIDE development environment. MPIDE is a PIC32-based system compatible with many existing Arduino® code examples, reference materials, and other resources.

The Pro MX7 is designed to be easy to use and suitable for use by anyone from beginners to advanced users experimenting with embedded control and network communications application. A built-in programming/debugging circuit compatible with the Microchip MPLAB IDE is provided, so no additional hardware is required for use with MPLAB. The kit contains everything needed to start developing embedded applications using either the MPLAB IDE or the MPIDE.

The Pro MX7 provides 52 I/O pins that support a number of peripheral functions, such as UART, SPI, I2C™ ports, as well as five pulse-width modulated outputs and five external interrupt inputs. Its network and communications features also include a 10/100 Ethernet interface, Full Speed USB 2.0 OTG interface, and dual CAN network interfaces. Ten of the I/O pins can be used as analog inputs in addition to their use as digital inputs and outputs.

The Pro MX7 can be powered in various ways via USB, or using an external AC-DC power adapter.