Basys3
- On-chip analog-to-digital converter
5v (Pins)
The Basys 3 board is a complete, ready-to-use digital circuit development platform based on the latest Artix-7™ Field Programmable Gate Array (FPGA) from Xilinx. With its high-capacity FPGA (Xilinx part numberXC7A35T-1CPG236C), low overall cost, and collection of USB, VGA, and other ports, the Basys3 can host designs ranging from introductory combinational circuits to complex sequential circuits like embedded processors and controllers. It includes enough switches, LEDs and other I/O devices to allow a large number designs to be completed without the need for any additional hardware, and enough uncommitted FPGA I/O pins to allow designs to be expanded using Digilent Pmods or other custom boards and circuits.
Documentation
Tutorials
-
-
Walks through installing Vivado and Vitis, the development environments used to create hardware and software applications targeting Digilent FPGA development boards.
-
-
-
Walks through using Vivado and Vitis to create a design in hardware and software that uses a processor to control buttons and LEDs.
-
-
-
Walks through using Vivado to create a simple design that blinks a singleLED.
-
-
-
Digilent Pmod IPs can be used to control connected Pmods from baremetal software.
-
It should be noted that not all Pmods are supported and that Pmod IPs are only supported in versions of Vivado 2019.1 and older.
-
Example Projects
Note:The latest version of Vivado supported by these projects is 2020.1.