Pmod CON3
Buy
Reference Manual
Technical Support
Pmod CON3
R/C Servo Connectors
Features
- Four standard 3-wire servo motor connectors
- Easily interface with Digilent system boards
- Flexible power delivery to servos
- 6-pin Pmod port withGPIOinterface
- Follows the DigilentPmod Interface SpecificationType 1
Physical
Width
1.0 in (2.54 cm)
Length
0.80 in (2.03 cm)
J1 Pinout
Pin 1
P1
Pin 2
P2
Pin 3
P3
Pin 4
P4
Pin 5
GND
Pin 6
VCC
The Digilent Pmod CON3 (Revision C) can be used to easily interface with up to four small servo motors that deliver anywhere from 50 to 300 ounce/inches of torque such as those used in radio controlled airplanes or cars as well as some mechatronics projects.
Example Projects
Programmable Logic
-
Line Following SRK Robot with 3D printed parts- Community Project
-
Using the PmodCON3 with chipKIT products- Community Project
-
Controlling Servos via Bluetooth (RN-42) and LabVIEW- Community Project
Reference Projects
-
Setting Up the Zybot - Hardware- Community Project
-
Setting up the Zybot - Hardware Round and Tall Edition- Community Project
-
Controlling Servos on FPGA- Community Project